User Manual Q&AAnswer
Apr 06, 2024 - 03:18 AM
To pair the Shenzhen P47 Stereo 5.0 Headset with your device, please follow these steps:
1. Turn on the headset by pressing and holding the power button for about three seconds. The LED light should start flashing, indicating that the headset is in pairing mode.
2. On your device, navigate to the Bluetooth settings. This can usually be found in the settings menu or the quick settings panel.
3. Make sure Bluetooth is turned on and search for available devices. The Shenzhen P47 Stereo 5.0 should appear in the list of available devices.
4. Select "Shenzhen P47 Stereo 5.0" from the list to initiate the pairing process.
5. Once the pairing is successful, the LED light on the headset should stop flashing and remain solid. Your device will also show a notification or indicator that it is connected to the headset.
Note: If prompted, enter a passcode or PIN to complete the pairing process. The default passcode for the Shenzhen P47 Stereo 5.0 Headset is usually "0000" or "1234".
If you encounter any issues during the pairing process, refer to the user manual or contact the manufacturer for further assistance.
Add New Comment