User Manual Q&AAnswer
Apr 03, 2024 - 07:57 AM
To locate and replace a blown fuse in your Ford F-150 (2009-2014), follow these steps:
1. Disconnect the battery: Before servicing any high-current fuses, always disconnect the battery to reduce the risk of electrical shock. Refer to the vehicle's manual for instructions on disconnecting the battery.
2. Locate the power distribution box: The power distribution box is located in the engine compartment. It contains high-current fuses that protect your vehicle's main electrical systems from overloads.
3. Identify the fuse or relay location: Refer to the fuse specification chart provided in the manual or on the Ford website to identify the specific fuse or relay location that corresponds to the electrical component that is not working.
4. Determine the fuse amp rating: The fuse amp rating is indicated on the fuse or relay. Make sure to use a fuse with the specified amp rating to avoid wire damage or fire hazards.
5. Remove the blown fuse: Use the fuse puller tool provided on the inside of the fuse panel cover to remove the blown fuse. If the fuse is difficult to remove, you can use a pair of needle-nose pliers.
6. Inspect the fuse: Check the blown fuse for a broken wire within the fuse. If the wire is broken, the fuse is blown and needs to be replaced.
7. Replace the fuse: Insert a new fuse with the same amp rating into the corresponding fuse or relay location. Make sure it is securely seated.
8. Reconnect the battery: Once you have replaced the fuse, reconnect the battery.
Note: If you are unsure about locating or replacing a fuse, it is recommended to consult the vehicle's manual or seek assistance from a qualified technician.
Please refer to the Ford F-150 (2009-2014) owner's manual for specific fuse box diagrams and additional information.
Add New Comment