User Manual Q&AAnswers
Mar 25, 2024 - 02:28 AM
Programming your GE Universal Remote Control is a simple process. You have two options: Direct Code Entry or Auto Code Search. Here are the steps for each method:
Direct Code Entry:
1. Locate the Code List included with your remote. Find the section for the type of device you wish to control (TV, cable, etc.) and locate the brand of your device.
2. Press and hold down the SETUP button on the remote until the red light on the remote control turns on. Release the SETUP button. The red light will remain on.
3. Press and release the device button on the remote for the type of device you wish to control (TV, cable, etc.). The red light will blink once and remain on.
4. Use the number buttons on the remote to enter the first 4-digit remote code you circled in the Code List. The red light will turn off after entering the fourth digit.
5. Point the remote at the device and test the buttons to see if the device responds as expected. If not, repeat steps 2-4 using the next code for that device.
6. Repeat steps 1-5 for each device you wish to control.
Auto Code Search:
1. Manually turn on the device you wish to control.
2. Press and hold down the SETUP button on the remote until the red light on the remote control turns on. Release the SETUP button. The red light will remain on.
3. Press and release the device button on the remote for the type of device you wish to control (TV, cable, etc.). The red light will blink once and remain on.
4. With the remote pointed at the device, press and release the POWER button on the remote. The remote will send 10 different codes to the device. The red light will blink once for each code and remain on after sending the 10 codes.
5. Manually turn the device back on.
6. With the remote pointed at the device, press and release the VOL+ button. The remote will re-send the first code of the 10 codes. The red light will blink once and remain on.
7. Use the remote to turn the device back on and test the buttons to see if the device responds as expected. If not, repeat steps 2-6 to search for a better code.
8. Repeat steps 1-7 for each device you wish to control.
These instructions should help you program your GE Universal Remote Control to work with your devices. If you have any further questions or need additional assistance, please refer to the GE Universal Remote Manual or contact the manufacturer's Technical Support Group.
Aug 26, 2025 - 12:15 PM
Turn on the device you want to control (TV, DVD, etc.).
Press and hold the Setup button until the red indicator light stays on.
Press the device button (TV, DVD, CBL, etc.). The light should blink once and stay on.
Enter the device code from the GE code list. The red light will turn off after entering the last digit.
Test the remote by pressing Power or Volume. If it works, you’re done. If not, repeat with the next code.
Press and hold the Setup button until the red indicator light stays on.
Press the device button (TV, DVD, CBL, etc.). The light should blink once and stay on.
Enter the device code from the GE code list. The red light will turn off after entering the last digit.
Test the remote by pressing Power or Volume. If it works, you’re done. If not, repeat with the next code.
By
md.shahin313035@gmail.com
By
Programming your GE Universal Remote Control is a straightforward process that allows you to consolidate multiple remotes into one convenient device. To begin, ensure your remote has fresh batteries, then locate the code list specific to your GE remote model—this is usually found in the user manual or on the official GE website. Turn on the device you wish to control (such as a TV, DVD player, or streaming box), then press and hold the “Setup” button on the remote until the red indicator light stays on. Next, press the corresponding device button (e.g., TV, DVD, AUX), and enter the four-digit code for your device brand using the number keys. The red light will turn off if the code is accepted. To verify functionality, point the remote at the device and press the power or volume button. If it responds correctly, the setup is complete; if not, repeat the process using the next code listed for your brand. For devices that don’t respond to any of the listed codes, the remote may also support a code search or auto-programming method, which is detailed in the user manual. If you want more information go this site https://washingmachinemanuals.com/
By
Programming your GE Universal Remote Control is a straightforward process that allows you to consolidate multiple remotes into one convenient device. To begin, ensure your remote has fresh batteries, then locate the code list specific to your GE remote model—this is usually found in the user manual or on the official GE website. Turn on the device you wish to control (such as a TV, DVD player, or streaming box), then press and hold the “Setup” button on the remote until the red indicator light stays on. Next, press the corresponding device button (e.g., TV, DVD, AUX), and enter the four-digit code for your device brand using the number keys. The red light will turn off if the code is accepted. To verify functionality, point the remote at the device and press the power or volume button. If it responds correctly, the setup is complete; if not, repeat the process using the next code listed for your brand. For devices that don’t respond to any of the listed codes, the remote may also support a code search or auto-programming method, which is detailed in the user manual.
By
Source: https://washingmachinemanuals.com/
Add New Comment