User Manual Q&AAnswer
Mar 25, 2024 - 02:12 AM
Cleaning the SILVERCREST SEM 105 B2 Ice Maker is an important maintenance task to ensure the quality and hygiene of the ice cubes. Here are the step-by-step instructions for cleaning the ice maker, as recommended in the instruction manual:
1. Before cleaning, always unplug the ice maker from the power source to ensure safety.
2. Remove the ice cube basket from the ice maker and set it aside.
3. Clean the inside of the ice maker using a damp cloth. Do not pour or spray any liquids onto the ice maker or immerse it in water or other liquids, as this can cause damage.
4. To clean stubborn dirt and deposits, you can use a cloth with a little vinegar. Gently wipe the interior surfaces of the water reservoir and wipe out any residue.
5. Rinse the water reservoir with clean water and allow it to drain out through the drain opening.
6. Clean the ice cube basket and ice cube scoop in warm water with mild detergent. Rinse them thoroughly and dry them before placing them back into the ice maker.
7. Wipe the housing and power cable of the ice maker with a damp cloth. If needed, you can use a mild detergent to remove stubborn dirt. Make sure to wipe off any detergent residues and ensure that the ice maker and power cable are completely dry before using it again.
8. Once the cleaning is complete, you can plug the ice maker back into the power source and resume normal operation.
It is important to note that you should not attempt to clean the ice maker and its accessories in the dishwasher, as this can cause irreparable damage. Additionally, do not clean the metal rods at the back of the machine with a cloth or similar, as it can scratch the surface and affect ice production.
By following these cleaning instructions, you can maintain the cleanliness and performance of your SILVERCREST SEM 105 B2 Ice Maker.
Add New Comment