User Manual Q&AAnswer
Mar 25, 2024 - 02:07 AM
To pair the EarFun Air Pro 3 True Wireless Earbuds with your device, follow these steps:
1. Open the charging case, and the earbuds will automatically power on and enter into pairing mode.
2. Activate Bluetooth on your Bluetooth-enabled device and search for other Bluetooth devices.
3. Select "EarFun Air Pro 3" from the list of Bluetooth devices shown (if a password is needed, type '0000').
Note: The earbuds will automatically connect with the device paired last time when the case is open. Each earbud can also be used independently.
If you need to connect the earbuds to a new device, you can follow either Option A or Option B:
Option A:
1. Unpair the earbuds from the Bluetooth-enabled device that's currently connected. The earbuds will disconnect from the current device and enter into pairing mode for another pair.
2. Search for the earbuds on the new device and connect.
Option B:
1. Place both earbuds back into the charging case and make sure they are being charged. Keep the cover open and then press and hold the reset button for 3 seconds until the LED indicators on the earbuds flash in blue rapidly.
2. Search for the earbuds on the new device and connect.
You can also pair and connect the earbuds with two Bluetooth devices simultaneously by following these steps:
1. Pair with the first device and stay connected.
2. Keep the earbuds in the charging case, then press and hold the reset button for 3 seconds until the LED indicator on the earbuds flash blue rapidly, and then the earbuds enter pairing mode and will disconnect from the first device.
3. Search for the earbuds on the second device to connect.
4. Manually reconnect the earbuds on the first device.
Note: The earbuds will automatically connect to both devices after finishing setting up the multipoint connection.
Add New Comment