User Manual Q&AAnswer
Mar 25, 2024 - 02:05 AM
To set up the INTEX 28270 Small Rectangular Metal Frame Pool, follow these steps:
1. Find a flat, level location that is free and clear of stones, branches, or other sharp objects.
2. Open the carton containing the liner and spread it out over the ground cloth with the drain valve facing the draining area.
3. Remove all the parts from the carton and place them on the ground in the location where they are to be assembled.
4. Use the provided pins to connect the horizontal beams and corner joints to form the frame of the pool.
5. Attach the vertical corner legs and corner joint seats to the frame.
6. Connect the "T" joints and "Y" joint vertical legs to the frame.
7. Attach the "Inverted T" side support legs to the "Y" joints.
8. Insert the drain connector into the drain valve on the pool liner.
9. Fill the pool with water up to just below the sleeve line.
10. Smooth out any wrinkles in the pool liner and ensure the water is level.
11. Follow the pool maintenance and chemical guidelines provided in the manual to keep the water clean and sanitized.
Please refer to the INTEX 28270 Small Rectangular Metal Frame Pool Owner's Manual for detailed instructions and illustrations.
Add New Comment