User Manual Q&AAnswer
Mar 22, 2024 - 02:26 AM
To install the Hisense Portable Air Conditioner in your window, follow these steps:
1. Check that all parts are included in the parts package.
2. Gather the necessary tools: Phillips screwdriver, pencil, and scissors.
3. Determine if your window is suitable for installation. The window installation kit allows you to install the air conditioner in most vertical-sliding windows 25" to 50" wide, or horizontal-sliding windows from 25" to 50" high.
4. Cut the adhesive foam seal to the proper length and attach it to the window sash and frame.
5. Insert the vent panel assembly, including extension panels if needed, into the window opening. Extend the extension panels if required. If your window length requires more than two panels, secure them with rivets after adjusting the length.
6. Cut the non-adhesive foam seal to the window width and stuff it between the glass and the window to prevent air and insects from entering the room.
7. Install the window-lock bracket with wood screws if needed.
8. Connect the exhaust hose assembly by pressing the flexible exhaust hose into the coupling and the window exhaust adapter. Both the coupling and window exhaust adapter have integral clips that snap onto the hose.
9. Slide the coupling into the slot on the back of the air conditioner to lock the hose on the unit.
10. Roll the air conditioner to the desired location and attach the window exhaust adapter to the outer slider section.
11. Plug the unit into a grounded 3-prong outlet. Do not use an adapter or extension cord.
12. Turn the air conditioner on, set the desired mode and temperature, and ensure proper ventilation by keeping a distance of at least 20 inches (50 cm) between the Portable AC and the window.
For more detailed instructions and illustrations, please refer to the user manual provided with the Hisense Portable Air Conditioner.
Add New Comment