User Manual Q&AAnswer
Mar 21, 2024 - 03:58 AM
To pair the Btootos A90 Pro earbuds with your phone, please follow these steps:
1. Make sure both the earbuds and the charging case are fully charged before first use.
2. Take both earbuds out of the charging case. Both earbuds will power on and start pairing automatically. If the earbuds are not connected to your device for more than 5 minutes, they will automatically turn off. Press the MFB (Multi-Function Button) for about 3 seconds to manually turn on the earbuds when prompted to "Power on". One earbud's indicator light will flash white alternately, and the other earbud's indicator light will slowly flash white when the two earbuds are paired successfully.
3. Enable the Bluetooth pairing mode on your phone. Search and select "A90 Pro" to connect. You should hear a voice prompt saying "Connected" when the earbuds are successfully paired.
4. If the indicator light of the earbud is off, it means the phone is connected.
5. By default, the earbuds will automatically connect to the last paired phone when powered on.
If you have any problem pairing the two earbuds with your phone, put the earbuds back in the charging case and repeat the above steps. You can also refer to the reset steps in the Frequently Asked Questions section of the manual.
These earbuds can be used not only together but also individually. If you want to use a single earbud, just take one earbud out of the case and connect it to your phone. When using two earbuds, manually turn off one earbud or put one back in the charging case, and you'll be able to use the other earbud alone.
For more detailed information and troubleshooting, please refer to the Btootos A90 Pro Wireless Earbud Bluetooth Earbuds User Guide.
Add New Comment