User Manual Q&AAnswer
Mar 21, 2024 - 02:46 AM
To pair the Btootos A90 Pro earbuds with your phone, follow these steps:
1. Make sure both the earbuds and the charging case are fully charged before first use.
2. Take both earbuds out of the charging case. Both earbuds will power on and start pairing automatically. If the earbuds are not connected to your device for more than 5 minutes, they will automatically turn off. Press the MFB (Multi-Function Button) on the earbuds for about 3 seconds to manually turn them on when prompted to "Power on". One earbud's indicator light will flash white alternately, and the other earbud's indicator light will slowly flash white when the two earbuds are paired successfully.
3. Enable the Bluetooth pairing mode on your phone. Search for available Bluetooth devices and select "A90 Pro" to connect. You should hear a voice prompt saying "Connected" when the earbuds are successfully paired.
If you have any problem pairing the two earbuds with your phone, put the earbuds back in the charging case and repeat the above steps. You can also refer to the reset steps in the Frequently Asked Questions section of the manual for further assistance.
Note: The A90 Pro earbuds can be used together or individually. If you want to use a single earbud, just take one earbud out of the case and connect it to your phone. When using two earbuds, you can manually turn off one earbud or put one back in the charging case to use the other earbud alone.
Add New Comment