User Manual Q&AAnswer
Mar 20, 2024 - 03:48 AM
To connect the LP gas cylinder to the grill, follow these steps:
1. Make sure the xxxx on the LP tank is closed by turning it fully clockwise.
2. Check that the control xxxx on the grill is turned off.
3. Remove the protective cap from the LP tank valve and coupling nut.
4. Hold the regulator in one hand and insert the xxxx into the valve outlet, making sure it is centered.
5. Hand-tighten the coupling nut clockwise until it comes to a full stop. Do not use tools.
6. To disconnect, fully close the tank valve by turning it clockwise, then turn the coupling nut counterclockwise until the regulator assembly detaches.
Please refer to the "Connecting Gas Cylinder" section in the user manual for more detailed instructions and safety precautions.
Add New Comment