User Manual Q&AAnswer
Mar 20, 2024 - 02:24 AM
To reconnect your NETGEAR WiFi range extender to your home network, you have two options:
1. Reconnect via Ethernet:
- Connect your range extender to your computer using an Ethernet cable.
- Launch a web browser on your computer and enter http://mywifiext.net in the address bar.
- Press Enter or click Search to access the login page.
- Enter the username and password that you set up during the initial setup process.
- Click LOG IN.
- Go to Setup > Wireless Settings.
- Under Security Options, verify that the Password (Network Key) matches your router password. If it doesn't, change it to match your router password.
- Click Apply.
- Reconnect your WiFi devices to the extender.
2. Reconnect via WiFi:
- Push and hold the Factory Settings button on the side panel of the extender for 7 seconds to reset it.
- Open your computer or mobile device's WiFi menu and connect to the extender's default WiFi network, NETGEAR_EXT.
- Launch a web browser on your connected device and enter http://mywifiext.net in the address bar.
- Press Enter or click Search to access the login page.
- Enter the default username (admin) and password (password) for the extender.
- Click LOG IN.
- Follow the prompts to reconnect your extender to your home network. If your router uses WEP security, you'll need to enter its network name (SSID) and password when prompted.
- Reconnect your WiFi devices to the extender.
For more detailed instructions and troubleshooting assistance, you can refer to the user manual provided by NETGEAR or visit their support website.
Add New Comment