User Manual Q&AAnswer
Mar 18, 2024 - 02:40 AM
To program your Hunter X-Core irrigation controller, please follow these steps:
1. Press the "Program" button on the controller. This will take you to the programming mode.
2. Use the arrow buttons to navigate through the different programming options, such as start times, watering days, and watering durations for each zone.
3. To set the start times, use the arrow buttons to select the desired start time for each zone. Press the "Enter" button to confirm the selection.
4. Next, you can set the watering days for each zone. Use the arrow buttons to select the desired watering days (e.g., Monday, Wednesday, Friday). Press the "Enter" button to confirm the selection.
5. After setting the watering days, you can set the watering duration for each zone. Use the arrow buttons to select the desired watering duration (in minutes) for each zone. Press the "Enter" button to confirm the selection.
6. Repeat steps 3-5 for each zone you want to program.
7. Once you have finished programming all the zones, press the "Program" button again to exit the programming mode.
Your Hunter X-Core irrigation controller is now programmed with the desired watering schedule for your zones. The controller will automatically run the irrigation system based on the programmed settings.
For more detailed instructions and illustrations, please refer to the Hunter X-Core Residential Irrigation Controller User Manual.
Add New Comment