User Manual Q&AAnswer
Mar 18, 2024 - 02:19 AM
To connect your Orbit 57946 B-hyve smart wifi sprinkler timer to your wifi network, follow these steps:
1. Plug in your Orbit 57946 B-hyve timer to a power source.
2. Install the Orbit B-hyve app on your smart device.
3. On your smart device, go to the wifi settings and look for the network named "Orbit_SmartHome_XXXX" (XXXX represents a unique identifier).
4. Connect to the "Orbit_SmartHome_XXXX" network.
5. Open the Orbit B-hyve app and create an account if you haven't already.
6. In the app, you will see a list of available networks. Choose your wifi network from the list.
7. Enter the password for your wifi network to connect your timer to your wifi signal.
8. Wait for the timer to establish a connection with your wifi network. The wifi icon on the timer will stop blinking and show solid lines when connected.
Note: If you need to re-pair your smart device with your B-hyve timer, you can turn the dial to "Off" and press the reset button on the back of the swing panel. The timer display will show "Pair."
For more detailed instructions and troubleshooting information, you can refer to the user manual provided with your Orbit 57946 B-hyve smart wifi sprinkler timer.
Add New Comment