User Manual Q&AAnswer
Mar 18, 2024 - 02:05 AM
To connect your Behringer X32 digital mixer to your computer, follow these steps:
1. Make sure your computer is turned on and your Behringer X32 is powered on.
2. Locate the USB port on the back panel of the X32 digital mixer.
3. Connect one end of a USB cable to the USB port on the X32 digital mixer.
4. Connect the other end of the USB cable to an available USB port on your computer.
5. Once the cable is connected, your computer should recognize the Behringer X32 as an audio device.
6. Open your recording software on your computer and select the Behringer X32 as the input and output device.
7. Configure the input and output settings in your recording software to match your desired recording setup.
8. You are now ready to record using your Behringer X32 digital mixer connected to your computer.
For more detailed instructions and troubleshooting tips, please refer to the Behringer X32 DIGITAL MIXER User Manual provided.
Add New Comment