User Manual Q&AAnswer
Mar 16, 2024 - 02:27 AM
To set up the Sage C73 Car Wireless FM Transmitter, please follow these steps:
1. Start your car and turn on the FM radio.
2. Tune your car's FM radio to a frequency that is not being used by any local radio stations. This will be the frequency that you will set on the transmitter.
3. Plug the Sage C73 Car Wireless FM Transmitter into your car's cigarette lighter socket.
4. The yellow LED display on the transmitter will automatically turn on and flash once per second.
5. Long press the "Phone" button on the transmitter for 2 seconds to enter FM mode. The number on the display will start flashing.
6. Use the left and right buttons to increase or decrease the frequency and adjust it to the same frequency as your car's FM radio. For example, if your car's FM radio is tuned to FM88.8, adjust the transmitter's frequency to FM88.8.
7. Click the "Phone" button again or wait for 3 seconds to exit FM mode.
8. Turn on the Wireless on your smartphone or other device.
9. Search for "C73" in the available devices and select it to connect.
10. Once connected, the transmitter's display will show "bt" and the current car battery voltage.
11. You can now play music from your phone through your car's stereo system via the transmitter.
Note: The transmitter will automatically connect to the last device it was paired with when used for the second time.
For more detailed instructions and information, please refer to the Sage C73 Car Wireless FM Transmitter user manual.
Add New Comment