User Manual Q&AAnswer
Mar 16, 2024 - 01:44 AM
To insert the SIM card into the AT&T Turbo Hotspot 2, follow these steps:
1. Remove the back cover and take the battery out.
2. Remove the SIM card from the outer card.
3. Locate the SIM card slot on the device.
4. Hold the SIM card so that the cut corner is at the top and the gold contacts are facing downward.
5. Insert the SIM card by pressing down on the clip and sliding it into the SIM slot.
Note: Make sure to insert the SIM card with the correct orientation to avoid any damage to the device.
6. Re-insert the battery by aligning the battery contacts with the terminals in the battery compartment and pushing the battery down until it clicks into place.
7. Line up the groove at the back of the device with the battery cover (the arrow will be pointing down).
8. Replace the battery cover over the battery compartment and press down on the four corners of the battery cover until it clicks into place.
Please refer to the user manual for visual illustrations and additional information on inserting the SIM card.
Add New Comment