User Manual Q&AAnswer
Mar 15, 2024 - 06:00 AM
To descale the Keurig K-Select Coffee Maker, you will need a large ceramic mug, freshwater, Keurig Descaling Solution, and access to a sink. Here are the steps to follow:
1. Empty the water from the water reservoir. If you have a Keurig Water Filter, remove and set it aside.
2. Press the power button to turn off the brewer.
3. Pour the entire bottle of Keurig Descaling Solution into the empty water reservoir. Then, fill the empty bottle with water and pour it into the water reservoir.
4. Press the power button to turn on the brewer.
5. Place a large mug on the drip tray and run a rinsing brew by lifting and lowering the handle and selecting the largest brew size.
6. Repeat the rinsing brew process until the "add water" light is illuminated. Do not use a K-Cup pod.
7. Let the brewer stand for at least 30 minutes while still on.
8. After 30 minutes, discard any residual solution from the water reservoir and rinse it thoroughly.
9. Fill the water reservoir with fresh water to the MAX fill line.
10. Place a large mug on the drip tray plate and run a rinsing brew using the largest brew size. Do not use a K-Cup pod. Pour the contents of the mug into the sink.
11. Repeat the brew process until you have completed at least 12 rinsing brews using the largest brew size. You may need to refill the water reservoir at least once during this process.
Note: The cleaning action of the Keurig Descaling Solution may result in foam being dispensed from the brewer. This is normal as the solution reacts with the scale inside. If your brewer is heavily scaled, it may not fill properly after the descaler is added. In this case, turn off and unplug the brewer, discard the solution, rinse the water reservoir thoroughly, and refill it with water. Then, plug in the brewer, power it on, and repeat the Step 3 Fresh Water Rinse cycle.
For more detailed instructions and video demonstrations, you can visit support.Keurig.com.
Add New Comment