User Manual Q&AAnswer
Mar 15, 2024 - 05:06 AM
To program the GE 33709 Universal Remote for your Samsung TV, you can follow the Direct Code Entry method outlined in the instruction manual. Here are the steps:
1. Locate the Code List included with your remote. Find the section for TVs and locate the codes for Samsung TVs.
2. Press and hold down the SETUP button on the remote until the red light turns on. Release the SETUP button.
3. Press the TV button on the remote. The red light will blink once and remain on.
4. Use the number buttons on the remote to enter the first 4-digit code for Samsung TVs from the Code List.
5. The red light will turn off after entering the fourth digit.
6. Point the remote at your Samsung TV and test the buttons to see if the TV responds.
7. If the buttons do not operate the TV, repeat steps 2-5 with the next code for Samsung TVs from the Code List.
8. Repeat steps 2-7 until you find a code that works for your Samsung TV.
Note: If you cannot find a code that works for your Samsung TV, you can try the Auto Code Search method outlined in the instruction manual. This method searches through all the codes in the remote to find a code for your device.
For more detailed instructions and troubleshooting tips, please refer to the GE 33709 Universal Remote Instruction Manual provided above.
Add New Comment