How do I connect the VISION WELL CG6S Security Cameras Wireless Outdoor to my Wi-Fi network? (VISION WELL CG6S Security Cameras Wireless Outdoor Operational Manual)

Answer

manuals.plus

Mar 12, 2024 - 01:44 AM

To connect the VISION WELL CG6S Security Cameras Wireless Outdoor to your Wi-Fi network, follow these steps:

1. Download and install the VISION WELL app on your Android or iOS device. You can find the app by scanning the QR code provided in the manual or by visiting the link: https://www.vicohome.io/download/

2. Sign in to the app and connect your phone to your Wi-Fi network.

3. Power on the camera by long-pressing the power button for 3 seconds. The camera will emit a prompt tone.

4. Double-click the power button to enter the network configuration mode. This is indicated by a prompt sound.

5. In the app, follow the instructions to configure the camera network. Make sure to select the correct Wi-Fi network and enter the password.

6. After configuring the camera network, click "Add Camera Now" in the app.

7. Enter the Wi-Fi network name and password that you want the camera to connect to. The camera only supports 2.4GHz Wi-Fi with stronger wall penetration capability.

8. Generate a QR code for pairing the camera by clicking "Continue" in the app.

9. Hold the camera about 20cm (7 inches) away from your phone and target the camera at the QR code on the app. The camera will emit a "Di" sound when the scanning is successful.

10. After a while, the camera will give a prompt sound indicating a successful connection. Set the name for the device in the app and select the location where you want to place the camera.

11. Click "Continue" to complete the pairing process.

If you encounter any issues during the Wi-Fi connection process, refer to the troubleshooting section in the manual for possible solutions.