User Manual Q&AAnswer
Mar 12, 2024 - 01:30 AM
To pair the Yobola T2PRO Bluetooth Earphone with your device, please follow these steps:
1. Take out both earphones from the charging box or turn them on if they are already out.
2. Turn on the Bluetooth function on your phone or device.
3. Search for available Bluetooth devices on your phone.
4. Look for the Bluetooth device named "T2 Pro" and select it.
5. Wait for a prompt tone or notification on your phone indicating a successful connection.
If you are unable to find the "T2 Pro" device, please try the following steps:
1. Make sure the earphones are turned on and not connected to any other device.
2. Turn off the Bluetooth function on your phone and then turn it on again.
3. Repeat the pairing process from step 2.
If you are still experiencing difficulties, it may be helpful to reset the pairing information and start the pairing process again. To do this, follow these steps:
1. Put both earphones back into the charging box and close the cover.
2. Take out the earphones from the charging box again.
3. Check if the earphones are now in binaural mode (both earphones connected to each other).
4. If the earphones are not in binaural mode, you can try clearing the pairing information on your phone and then repeat the pairing process.
If you continue to have issues with pairing, please refer to the troubleshooting section in the user manual or contact Yobola customer support for further assistance.
Add New Comment