User Manual Q&AAnswer
Mar 04, 2024 - 02:08 AM
To set up the HoMEDiCS ST300 Drift Sandscape, please follow these steps:
1. Remove all protective materials from the felt surface inside the drift bowl.
2. Pour one bag of sand into the center of the table and use the included sand rake to level the sand. It doesn't need to be perfect.
3. Place the metal ball into the center of the table. It will find the magnet. If it doesn't find the magnet right away, the magnet will find the ball during the first design.
4. Place the glass foam side down on the top and center it.
5. Untie the power cord, connect it to the adapter, and insert the barrel jack into the back of the drift Sandscape. Then plug the 3-prong adapter plug into a 120-volt household electrical outlet. The lights will illuminate.
6. Download the drift Sandscape App from the app store.
7. Follow the instructions within the app for set up and get ready to drift.
Note: The product comes with two bags of sand for the 21" version and one bag for the 16" version. The sand included with the landscape is recommended, but it can also be purchased at homedics.com.
Add New Comment