Answer
Mar 04, 2024 - 01:47 AM
To pair the drone with the transmitter, please follow these steps:
1. Turn on the drone by flipping the switch located on the bottom of the aircraft.
2. Place the drone on a flat and level surface, with the tail end (green LEDs) facing towards you.
3. Press the power button on the transmitter. You will hear a beep.
4. Push the throttle lever (left stick) to the highest position, and then pull it straight down to the lowest position. You will hear one beep for each throttle movement.
5. Wait for the drone LEDs to stop flashing and remain on. This indicates that the drone has successfully paired with the transmitter.
Note: If you have multiple drones, make sure to pair them one at a time.
If you need further assistance, please refer to the user manual provided with your Sharper Image Lighted Drone.
Add New Comment