User Manual Q&AAnswer
Mar 04, 2024 - 01:37 AM
To fill the ink tanks on the EPSON ET-2400 All-In-One Printer, follow these steps:
1. Open the ink tank cover and locate the cap for the black (BK) ink tank.
2. Unpack the black (BK) ink bottle and remove the bottle cap.
3. Insert the ink bottle into the filling port, making sure not to force it.
4. Wait for the ink to fill the tank. Do not squeeze the bottle or allow it to touch any other surface.
5. When the ink tank is full, remove the ink bottle and securely close it with the bottle cap. If there is any ink remaining in the bottle, store it upright for later use.
6. Repeat the previous steps for the other colors.
7. Close the ink tank cover.
8. Press the power button to turn on the product and wait for the power and ink lights to stay on. The Wi-Fi lights will flash alternately.
9. Press and hold the stop button for 5 seconds until the power light starts to flash and ink charging begins. Ink charging takes about 11 minutes.
10. After ink charging is complete, you can top off the ink tanks with any remaining ink. Refer to the online User's Guide for instructions on how to do this.
Please note that it is important to periodically inspect the ink levels to ensure they do not fall below the lowest lines on the tanks. Prolonged use when any level is below the lowest line could damage the product. Refer to the online User's Guide for instructions on refilling the ink tanks.
Add New Comment