User Manual Q&AAnswer
Mar 04, 2024 - 01:36 AM
To connect the NexFoto NF-W10C 10.1 Smart Digital Picture Frame to Wi-Fi, please follow these steps:
1. Plug in your frame: Connect the AC/DC adapter to the back of the frame and plug it into a power source. The frame will power on in seconds.
2. Initial Settings: When you enter the system for the first time, you will be prompted to set up several initial settings, including Wi-Fi.
3. Connect to Wi-Fi: During the initial settings or under the Wi-Fi setting, select the Wi-Fi network you would like to connect to. Enter the correct password if required. If your Wi-Fi network is not on the list, try restarting your router or moving the frame closer to your router. Wait for a few seconds and check again.
Note: The NexFoto NF-W10C 10.1 Smart Digital Picture Frame supports 2.4GHz Wi-Fi networks only. It is recommended to connect to a private Wi-Fi network for better security.
If you have any further questions or encounter any issues, please refer to the User Manual provided with the product or contact NexFoto customer service for assistance.
Add New Comment