User Manual Q&AAnswer
Mar 01, 2024 - 11:34 PM
To set the time on your SMARTER SC91 Time and Temperature Projection Alarm Clock, please follow these steps:
1. Plug in the power adapter to the clock and ensure it is connected to a power source.
2. Remove the battery cover on the clock and take out the battery insulation sheet. xxxx the battery cover back on. Note that the battery is used for keeping manual settings only and cannot be used as a normal working power supply.
3. Open the battery compartment cover of the wireless remote sensor and insert 2 x AA batteries. Ensure that the battery polarities [ "+" and "–"] are correct. Close the battery compartment.
4. Wait for the clock to make a connection with the wireless remote sensor. This will be indicated by a flashing reception RF antenna symbol on the LCD screen. This process may take up to 3 minutes.
5. Once the connection is established, press and hold the "SET" button on the clock for more than 3 seconds. The 12Hr/24Hr display will start to flash.
6. Use the "+" and "-" buttons to set the time format to either 12-hour mode or 24-hour mode.
7. Press the "SET" button to confirm your setting. The hour display will start to flash.
8. Use the "+" and "-" buttons to set the correct hour.
9. Press the "SET" button to confirm your setting. The minute display will start to flash.
10. Use the "+" and "-" buttons to set the correct minute.
11. Press the "SET" button to confirm your setting. The year display will start to flash.
12. Use the "+" and "-" buttons to set the correct year.
13. Press the "SET" button to confirm your setting. The month display will start to flash.
14. Use the "+" and "-" buttons to set the correct month.
15. Press the "SET" button to confirm your setting. The date display will start to flash.
16. Use the "+" and "-" buttons to set the correct date.
17. Press the "SET" button to confirm your setting. The month and date icon display will start to flash.
18. Use the "+" and "-" buttons to set the date display format to either Month/Date or Date/Month.
19. Press the "SET" button to confirm your setting. The language selection for the weekday display will start to flash.
20. Use the "+" and "-" buttons to select your preferred language.
21. Press the "SET" button to confirm your setting. The weather forecast pattern display will start to flash.
22. Use the "+" and "-" buttons to select the current weather pattern.
23. Press the "SET" button to confirm your setting and exit the setting mode.
Please note that if no button is pressed within 30 seconds, the clock will automatically quit the manual setting mode and enter the clock mode.
Add New Comment