User Manual Q&AAnswer
Mar 01, 2024 - 11:30 PM
To set the time and date on the Ivation LED Digital Time Bar, follow these steps:
1. Make sure the time bar is plugged into a standard wall outlet and turned on.
2. Press the SET/ENTER button on the remote control to enter clock setting mode.
3. Use the number pad on the remote control to enter the date in MM/DD/YYYY format. For example, if the current date is July 15, 2022, you would enter 07/15/2022.
4. After entering the date, press the SET/ENTER button again to save and exit.
5. Use the number pad on the remote control to enter the time in HH:MM format. For example, if the current time is 3:30 PM, you would enter 15:30. If you're using the 12-hour time format, use the AM/PM button to switch between AM and PM.
6. Press the SET/ENTER button again to save and exit.
7. The time and date should now be set on the LED display of the time bar.
Note: If you want to exit the clock setting mode without saving, you can press the CLOCK button at any time.
For more information and detailed instructions, please refer to the User Guide provided with the product.
Add New Comment