User Manual Q&AAnswer
Feb 28, 2024 - 03:44 AM
To clean the Roomba i Series Robot Vacuum, follow these steps:
1. Emptying the Bin:
- Press the bin release button to remove the bin.
- Open the bin door to empty the bin.
- Place the bin back in the robot.
2. Cleaning the Filter:
- Remove the bin and remove the filter by grasping both ends and pulling it out.
- Tap the filter against a trash container to remove debris.
- Reinsert the filter with the ridged grips facing out. Place the bin back in the robot.
3. Cleaning the Full Bin Sensors:
- Remove and empty the bin.
- Wipe the inner sensors with a clean, dry cloth.
4. Cleaning the Edge-Sweeping Brush:
- Use a coin or small screwdriver to remove the xxxx holding the Edge-Sweeping Brush in place.
- Pull to remove the brush and remove any hair or debris.
- Reinstall the brush.
5. Cleaning the Multi-Surface Brushes:
- Pinch the brush frame release tab and remove any obstructions.
- Remove the brushes from the robot and remove any hair or debris.
- Reinstall the brushes in the robot.
6. Cleaning the Sensors, Camera Window, and Charging Contacts:
- Wipe the sensors, camera window, and charging contacts with a clean, dry cloth. Do not spray cleaning solution or water onto the sensors or sensor openings.
For more detailed instructions and illustrations, refer to the Roomba i Series Robot Vacuum Owner's Guide.
Add New Comment