User Manual Q&AAnswer
Feb 28, 2024 - 03:06 AM
To adjust the program schedules on the Honeywell PRO 4000 Series Programmable Digital Thermostat, follow these steps:
1. Make sure the thermostat is set to the system you want to program (Heat or Cool).
2. Press the SET button until "Set Schedule" is displayed.
3. Press the UP or DOWN button to set your weekday Wake time (Mon-Fri), then press SET.
4. Press the UP or DOWN button to set the temperature for this time period, then press SET.
5. Repeat steps 3 and 4 for each weekday time period.
6. Press SET to set the weekend time periods (Sat-Sun), then press RUN to save and exit.
For more detailed instructions on programming your thermostat, you can refer to the Honeywell PRO 4000 Series Programmable Digital Thermostat User Guide. You can search online for "Honeywell 69-1928EFS" to find and download the user guide.
Please note that the thermostat also has a built-in compressor protection feature. This feature forces the compressor to wait for a few minutes before restarting to prevent damage. During the wait time, the display will flash the message "Cool On" (or "Heat On" for heat pump systems). Once the safe wait time has elapsed, the message stops flashing and the compressor turns on.
If you have any further questions or issues with your Honeywell PRO 4000 thermostat, you can contact Honeywell Customer Care at 1-800-468-1502 for assistance.
Add New Comment