User Manual Q&AAnswer
Feb 26, 2024 - 03:46 AM
To install the batteries in the Wildgame Mirage camera, follow these steps:
1. Open the door at the bottom of the camera by unlatching the locking tab.
2. Slide the battery compartment cover to the left to open it.
3. Insert the batteries into the camera with the positive ends facing you where marked positive and the negative ends facing you where marked negative. Make sure not to mix old and new batteries or different types of batteries.
4. Close the battery compartment cover by sliding it to the right and latching it.
To load the SD memory card into the camera, follow these steps:
1. Make sure the camera is powered off.
2. Locate the SD card slot on the camera.
3. Insert the SD memory card into the slot with the connectors facing up.
4. Push the card in until it clicks into place.
Please refer to the Wildgame Mirage user manual for more detailed instructions and illustrations.
Add New Comment