User Manual Q&AAnswer
Feb 26, 2024 - 03:43 AM
To connect your Jabra Pro 920 headset to your desk phone, please follow these steps:
1. Determine the type of desk phone you have:
- Desk Phone with Headset Port: This type of desk phone has a dedicated headset port.
- Desk Phone with Jabra Link: A Jabra Link adapter enables an incoming call to be answered or ended by the headset multi-function button.
- Desk Phone with GN1000 remote Handset Lifter: The GN1000 remote handset lifter manually lifts the desk phone handset to make or answer a call.
- Desk Phone without Headset Port: This desk phone does not have a dedicated headset port.
2. Based on the type of desk phone you have, follow the corresponding instructions below:
- Desk Phone with Headset Port:
- Plug the supplied telephone cable into the port marked on the base.
- Connect the telephone cable to the headset port on the desk phone.
- Desk Phone with Jabra Link:
- Connect the Jabra Link adapter as shown in the adapter documentation supplied with the Jabra Link. On some phones, the telephone cable will also need to be connected.
- Call your connected desk phone using another phone to enable the Jabra Link adapter. Wait 10 seconds before answering the phone.
- Desk Phone with GN1000 remote Handset Lifter:
- On the desk phone, unplug the handset cable from the phone body.
- Connect the handset cable to the port marked on the base.
- Plug the supplied telephone cable into the port marked on the base.
- Connect the telephone cable into the handset port on the desk phone.
- Connect the GN1000 cable into the port marked on the base.
- Desk Phone without Headset Port:
- On the desk phone, unplug the handset cable from the phone body.
- Connect the handset cable to the port marked on the base.
- Plug the supplied telephone cable into the port marked on the base.
- Connect the telephone cable into the handset port on the desk phone.
3. Once the headset is connected to the desk phone, plug the supplied power adapter into the port marked on the base and connect the power adapter to the mains power socket.
4. Dock the headset onto the base. When docked correctly, the headset battery will begin charging, if needed. Charge for 20 minutes or until the battery indicator on the base is steady green.
5. To configure the sound, put on the headset or tap the headset multi-function button if the headset is currently undocked. Get a dial tone by either pressing the headset button on the desk phone or lifting the desk phone handset. Dial a friend or colleague's phone number using the desk phone. If you cannot hear anything, adjust the clear dial tone switch on the back of the base until the sound is optimal.
You have now successfully connected your Jabra Pro 920 headset to your desk phone. For more detailed instructions and troubleshooting, please refer to the user manual provided with the product.
Add New Comment