User Manual Q&AAnswer
Feb 26, 2024 - 01:39 AM
To set the time on your Newentor NT3378 Weather Station, follow these steps:
1. Plug in the power cord or insert 2 x AA batteries into the main unit.
2. Open the cover of the remote sensor and insert 2 x AA batteries.
3. Make sure the channel of the main unit matches the channel of the remote sensor. Press the "" button on the remote sensor to set the channel.
4. Once the main unit is connected to the remote sensor, it will automatically start searching for WWVB signals to set the time and date. This process may take up to 7 minutes.
5. If the time zone needs to be adjusted, press and hold the "" button for about 2 seconds to enter the time setting operation. Use the "" and "" buttons to select the time zone, then press the "" button to confirm.
6. To manually set the time, press and hold the "" button for about 2 seconds to enter the time setting operation. Use the "" and "" buttons to set the hour, then press the "" button to confirm and move to the next step. Repeat this process to set the minute, month, date, and year.
7. Once the time is set, the weather station will display the current time and date.
Note: If the weather station is unable to receive a strong WWVB signal, you can manually set the time by following the steps above.
For more detailed instructions and illustrations, refer to the User Manual provided with your Newentor NT3378 Weather Station.
Add New Comment