User Manual Q&AAnswer
Feb 26, 2024 - 01:12 AM
To connect the Logitech K480 Bluetooth Multi-Device Keyboard to your computer or mobile device, follow these steps:
1. Power on the keyboard by pulling the tab from the battery compartment. The On/Off switch should be in the On position by default.
2. On the keyboard, select a Bluetooth wireless channel by turning the selection dial to 1 (the factory setting).
3. To connect to a computer or mobile device running Windows, Android, or Chrome, press and hold down the "pc" connect button for 3 seconds. The light next to the connect button will start blinking.
4. To connect to an Apple Macintosh, iPhone, or iPad, press and hold down the "i" connect button for 3 seconds. The light next to the connect button will start blinking.
5. On your computer or mobile device, go to the Bluetooth settings and make sure Bluetooth is enabled.
6. On a computer running Windows 7, click Start, then Devices and Printers. Click Add a device and select Logitech Keyboard K480 from the list of available Bluetooth devices. Follow the onscreen instructions to complete the pairing.
7. On a computer running Windows 8, click Settings in the upper-right corner of the display, then Change PC Settings. Click PC and Devices, select Bluetooth, and choose Logitech Keyboard K480 from the list of available devices. Follow the onscreen instructions to complete the pairing.
8. On a computer running Mac OS X (10.9 or later), open System Preferences, click Keyboard, and then click Set Up Bluetooth Keyboard. When the message "Found Logitech Keyboard K480" appears, click Continue and follow the onscreen instructions to complete the pairing.
9. On a computer running Chrome OS, click the status area in the lower-right corner of the screen, select Bluetooth status, choose Logitech Keyboard K480 from the list of available devices, and click Connect. Follow the onscreen instructions to complete the pairing.
10. On an Android device, go to Settings > Wireless and Networks, tap Bluetooth, and confirm it is active. When a list of Bluetooth wireless devices appears, select Logitech Keyboard K480 and click Next. Follow the onscreen instructions to complete the pairing.
11. On an iPhone or iPad (iOS), go to Settings > Bluetooth and make sure Bluetooth is enabled. When a list of Bluetooth wireless devices appears, tap Logitech Keyboard K480. If prompted for a PIN, enter the code on your Logitech Keyboard K480. The light next to the connect button on the keyboard will illuminate steadily for 5 seconds when successfully paired.
12. Once the keyboard is successfully paired with a device, you can switch between devices by turning the selector dial to the channel you used to connect the device. The light next to the associated connect button will blink before turning solid blue for 5 seconds, confirming the selection.
Note: If you want to connect additional devices to the keyboard, select an unused Bluetooth wireless channel and repeat the pairing process.
For more information and troubleshooting tips, refer to the Logitech K480 Bluetooth Multi-Device Keyboard User Manual.
Add New Comment