Answer
Feb 23, 2024 - 11:52 PM
To program your GE Universal Remote Control to control your TV, follow these steps:
1. Locate the Remote Code List provided in the manual.
2. Find the DEVICE CATEGORY you wish to program (e.g., TV) and then find the BRAND of your TV.
3. Circle all the codes listed under that brand.
4. Manually turn on your TV.
5. Press and hold the SETUP button on the remote until the red indicator light stays on (approximately 2 seconds), then release the SETUP button.
6. Press and release the TV button on the remote. The red indicator will blink once and then remain on.
7. Enter the first 4-digit code for your TV using the number buttons on the remote. If the code is valid, the red indicator light will turn off. If the code is not valid, the red indicator light will flash and remain on.
8. Point the remote at your TV and press the POWER button. If your TV turns off, no further programming is required. If your TV does not turn off, repeat steps 5-7 using the next code listed under your TV brand.
9. Repeat this process for any other devices you want to program (e.g., DVR, DVD, CBL, SAT).
Note: If you have any issues programming your remote or if your brand is not listed in the code list, refer to the Auto Code Search method in the manual or contact JASCO Customer Service for assistance.
Add New Comment