User Manual Q&AAnswer
Feb 23, 2024 - 11:46 PM
To set the alarm on your Anko Clock Radio, follow these steps:
1. Press the Power button (1) to put the radio into standby mode.
2. Press and hold either the Volume down/Alarm 1 button (7) or Volume up/Alarm 2 button (9) until the hour digits start blinking. The alarm ringing indicator will light up depending on which alarm is chosen.
3. While the hour digits are blinking, use the Tune down/Previous button (3) or Tune up/Next button (4) to adjust the desired hour.
4. Press the Volume down/Alarm 1 button (7) or Volume up/Alarm 2 button (9) to save the hour setting. The minute digits will start blinking.
5. While the minute digits are blinking, use the Tune down/Previous button (3) or Tune up/Next button (4) to adjust the desired minute.
6. Press the Volume down/Alarm 1 button (7) or Volume up/Alarm 2 button (9) to save the minute setting.
7. Use the Tune down/Previous button (3) or Tune up/Next button (4) to select the wakeup mode for either buzzer (showing "buzz") or radio (showing "rAd").
8. Press the Volume down/Alarm 1 button (7) or Volume up/Alarm 2 button (9) to save the wakeup mode.
9. Use the Tune down/Previous button (3) or Tune up/Next button (4) to select the wakeup volume.
10. Press the Volume down/Alarm 1 button (7) or Volume up/Alarm 2 button (9) to save and finish setting the alarm.
Now your alarm is set on your Anko Clock Radio.
Add New Comment