User Manual Q&AAnswer
Feb 21, 2024 - 10:13 PM
To set up the GhostBed Adjustable Power Base, follow these steps:
1. Lift the folded bed frame unit out of the shipping carton and place it on a flat floor.
2. Lower the head and foot frame pieces with their top side facing downward.
3. Cut the ties to remove all accessory boxes and the retainer bar from inside the unit.
4. Attach the bed legs by hand-tightening them clockwise into the pre-threaded holes on the bed frame.
5. Install the retainer bar by turning the bed frame over carefully, top side up, and inserting the ends of the retainer bar into the quick connect brackets located at the foot of the bed.
6. Set up the electronics by connecting the power cord from the control box to the power supply and plugging the power cord into a working electrical outlet. Install the batteries into the remote control.
7. Confirm that the remote control works by pressing the lift buttons.
Please refer to the GhostBed Adjustable Power Base User Manual for more detailed instructions and illustrations.
Add New Comment