User Manual Q&AAnswer
Feb 21, 2024 - 02:07 AM
To connect and pair the AMAZFIT Bip 3 Pro Smartwatch with your phone, follow these steps:
1. Download and install the Zepp app on your phone. You can do this by scanning the QR code provided in the user manual or by searching for "Zepp" in your phone's app store.
2. Once the Zepp app is installed, open it and log in to your account. If you don't have an account, you will need to create one.
3. On the watch, navigate to the screen that displays a QR code for pairing.
4. Open the Zepp app on your phone and tap on the "Profile" tab at the bottom of the screen.
5. In the Profile section, select your AMAZFIT Bip 3 Pro Smartwatch from the list of devices.
6. Tap on the "Pair" button and follow the on-screen instructions to scan the QR code displayed on the watch.
7. Once the QR code is successfully scanned, your phone will be paired with the watch.
Note: Make sure your phone's operating system is Android 7.0 or iOS 12.0, or later versions. Also, ensure that your phone's Bluetooth is turned on during the pairing process.
If you have already paired the watch with another phone and want to pair it with a new phone, follow these additional steps:
1. Open the Zepp app on your old phone and synchronize data with the watch.
2. On the old phone, go to the Profile > Amazfit Bip 3 Pro page and tap the "Unpair" button at the bottom to unbind the watch.
3. If you are using an iPhone, after unbinding, go to the Bluetooth menu on your phone, find the Bluetooth name corresponding to the watch, and tap the button on the far right of the Bluetooth name. Tap "Ignore This Device" to unpair the phone and the watch.
4. Restore the factory settings of the watch. After the watch is rebooted, follow the initial pairing procedure mentioned above to pair the watch with your new phone.
By following these steps, you should be able to successfully connect and pair your AMAZFIT Bip 3 Pro Smartwatch with your phone.
Add New Comment