User Manual Q&AAnswer
Feb 21, 2024 - 01:33 AM
To program the Chamberlain Universal Wireless Keypad to your garage door opener, please follow these steps:
1. Determine your garage door opener type: The keypad programming instructions vary depending on the type of garage door opener you have. Refer to the "DETERMINE GARAGE DOOR OPENER TYPES" section in the user manual to identify your opener type.
2. Select and write a 4-digit PIN: Choose a 4-digit PIN that you will use to operate the keypad.
3. Follow the programming instructions specific to your garage door opener type: Refer to the corresponding programming instructions in the user manual based on your opener type (TYPE 1, TYPE 2, TYPE 3, TYPE 4, or TYPE 5). Each type has its own set of instructions and dip switch sequences.
4. Test and use the keypad: After programming, wait until the lights on the keypad turn off. Then, enter your PIN followed by the "0" key to test and use the keypad.
If the opener does not function, repeat the programming steps. For additional troubleshooting or further assistance, you can contact the Chamberlain customer support at 1-800-442-1255.
Please note that the above instructions are a summary and it is recommended to refer to the complete user manual for detailed programming instructions specific to your garage door opener type.
Add New Comment