User Manual Q&AAnswer
Feb 21, 2024 - 01:29 AM
To set up the PIX-LINK LV-AC24 1200M Dual Band Wifi Repeater as a repeater, follow these steps:
1. Power On: Plug the Repeater into a power outlet next to your router.
2. Set Up:
- Method 1: Via a Web Browser
- Connect your computer or smartphone to the Repeater's network: PIX-LINK-2.46/PIX-LINK-5.8G, Default Password is 12345678.
- Launch a web browser and enter http://192.168.7.1 or set up.pix-link.net in the address bar. Then enter password: admin to log in.
- Follow the web instructions to complete the setup.
- Click Repeater Mode.
- The system will automatically scan the surrounding wireless networks.
- Select the SSID of the master router and enter Repeater SSID and the Pass Phrase. The default Repeater SSID is set to be xxxx-2.4G-EXT / xxxx-5.8G-EXT (xxxx indicates the master router's wireless network name). Then click Apply to complete the setup.
- The Repeater LED should turn solid on, indicating a successful connection to your router.
- Method 2: Via the WPS Button
- Press the WPS button on your router.
- Within 2 minutes, press the WPS button on the Repeater for 1 second. The Repeater LED should change from blinking to solid on, indicating a successful connection.
3. Relocate: Plug the Repeater about halfway between your router and the Wi-Fi dead zone. Wait for about 2 minutes until the Signal LED turns solid blue. If it doesn't, relocate the Repeater closer to the router to achieve better signal quality.
Once the setup is complete, you can connect your devices to the Repeater wirelessly or via an Ethernet cable to enjoy the internet.
For more detailed instructions and troubleshooting, please refer to the product manual.
Add New Comment