User Manual Q&AAnswer
Feb 21, 2024 - 01:26 AM
To pair sensors with the Wahoo ELEMNT BOLT GPS Bike Computer, follow these steps:
1. Turn on the ELEMNT BOLT by holding the left-side button.
2. Press the bottom left button to access the menu.
3. Select "Add Sensor" from the menu.
4. Activate the sensor by shaking it and look for LED lights to blink. Note that the LEDs will disable after 30 seconds to save battery.
5. Save the sensor by following the on-screen instructions.
6. Repeat the process for each sensor you want to pair with the bike computer.
Please refer to the user guide for more detailed instructions and troubleshooting tips.
Add New Comment