User Manual Q&AAnswer
Feb 21, 2024 - 01:25 AM
To set the alarm on the Philips R3306 clock radio, follow these steps:
1. Make sure you are in standby mode.
2. Press and hold the AL1 or AL2 button for 2 seconds to set the alarm time.
3. Use the HR button to set the hour and the MIN button to set the minute.
4. Press the AL1 or AL2 button to confirm the alarm time.
5. You can select the alarm source (FM radio or buzzer) by pressing the AL1 or AL2 button in standby mode. The corresponding alarm icon will light up.
6. To activate or deactivate the alarm timer, press the AL1 or AL2 button repeatedly. When the alarm timer is activated, the alarm indicator turns on. When it is deactivated, the alarm indicator turns off.
7. The alarm will repeat ringing for the next day. To stop the alarm, press the corresponding AL1 or AL2 button.
For more detailed instructions and illustrations, please refer to the "Set alarm time" section in the user manual of the Philips R3306 clock radio.
Add New Comment