User Manual Q&AAnswer
Feb 20, 2024 - 06:25 AM
To secure the IKEA BILLY Bookcase to the wall, you will need to use the wall attachment device(s) provided with the furniture. Please note that xxxx (s) and plug(s) for the wall are not included, so you will need to use xxxx (s) and plug(s) suitable for your walls. If you are unsure about the appropriate screws and plugs to use, it is recommended to seek professional advice.
Here are the steps to secure the bookcase to the wall:
1. Identify the wall attachment device(s) included with your bookcase. These are typically metal brackets or straps.
2. Position the bookcase in the desired location against the wall.
3. Use a pencil or marker to mark the spots on the wall where the wall attachment device(s) will be installed. Make sure to align them with the corresponding holes or slots on the back of the bookcase.
4. Remove the bookcase from the wall and set it aside.
5. Drill pilot holes at the marked spots on the wall. The size of the pilot holes should match the size of the screws you will be using.
6. Insert the appropriate wall plugs into the pilot holes.
7. Position the wall attachment device(s) over the wall plugs and align them with the pilot holes.
8. Secure the wall attachment device(s) to the wall by driving screws through the device(s) and into the wall plugs. Make sure the screws are tightened securely.
9. Place the bookcase back against the wall, aligning the holes or slots on the back of the bookcase with the wall attachment device(s).
10. Insert screws through the holes or slots on the back of the bookcase and into the wall attachment device(s). Tighten the screws to secure the bookcase to the wall.
11. Double-check that the bookcase is securely attached to the wall by giving it a gentle tug. It should not tip or wobble.
By following these steps and ensuring the bookcase is properly secured to the wall, you can help prevent tip-over accidents and ensure the safety of your household.
Add New Comment