User Manual Q&AAnswer
Feb 18, 2024 - 11:59 PM
To set up the TOGUARD Trail Camera, please follow these steps:
1. Unpack the camera and check that all accessories are included in the box.
2. Insert 4 or 8 x 1.5V AA batteries into the battery compartment. Make sure to insert them correctly and do not mix new and old batteries.
3. Insert a micro SD memory card (up to 32GB capacity) into the memory card slot. Ensure that the write protection on the memory card is not locked.
4. Switch the mode selector to the "SETUP" position to enter the setup mode.
5. On the setup menu, you can adjust various settings such as photo resolution, video resolution, shot lag, sensitivity of motion sensors, and more. Use the arrow buttons and OK button to navigate and make selections.
6. Once you have finished adjusting the settings, switch the mode selector to the "ON" position to enter the live mode. The camera will automatically start recording photos and videos when motion is detected.
7. You can view the captured photos and videos on the camera's display screen or connect the camera to a computer using the USB cable to download them.
For more detailed instructions and information, please refer to the TOGUARD Trail Camera Instruction Manual included in the box.
Add New Comment