User Manual Q&AAnswer
Feb 18, 2024 - 11:51 PM
To change the backlight mode on the Ducky One 3 Series DKON2161ST Mechanical Keyboard, you can use the following steps:
1. Press the Fn key and the F10 key simultaneously to enter the backlight mode selection.
2. Use the arrow keys (← and →) to navigate through the different backlight modes. Each mode represents a different lighting effect.
3. Press the Fn key and the ← key simultaneously to decrease the speed of the backlight effect.
4. Press the Fn key and the → key simultaneously to increase the speed of the backlight effect.
5. To turn off the backlight completely, hold the Fn key and the F10 key for 3 seconds. This will turn off all backlit modes, including CM1 and CM2.
Note: The backlight modes mentioned in the manual, such as Wave mode, Alpha mode, Tetris mode, etc., can be accessed by cycling through the available modes using the Fn+F10 key combination. The specific key sequences for each mode may vary, so it's recommended to refer to the manual for the complete list of modes and their corresponding key combinations.
For further assistance or more detailed information on the backlight modes and customization options, it is recommended to contact the distributor for your region or refer to the user manual provided with the keyboard.
Add New Comment