User Manual Q&AAnswer
Feb 18, 2024 - 11:12 PM
To connect the HDMI to USB3.0+HDMI Capture to your computer, follow these steps:
1. Plug the HDMI to USB3.0+HDMI Capture into your computer's USB3.0 interface using the USB3.0 output port.
2. Connect your HDMI video source to the HDMI input port of the capture device using an HDMI cable.
3. If you want to watch the video while copying, connect the "HDMI IN" slot of the capture device to your HDMI device.
4. Make sure the audio sampling rate is set to 48KHz. Right-click the speaker icon in the lower right corner of your computer, select "recording device(R)" in the pop-up menu, and choose "FHD CAPTURE" in the "recorded" tab. In the "advanced" tab, select the appropriate channel, such as 16, and set the sampling rate to 48000Hz (DVD quality).
5. If there is no audio input or if you need to adjust the input audio range, click the "level" tab and adjust the volume accordingly.
Please note that these instructions are for OBS Studio under the Windows system. For instructions on using OBS Studio under the MAC system, please refer to the manual.
Add New Comment