User Manual Q&AAnswer
Feb 17, 2024 - 07:36 AM
To connect the LOOKCAM H.264 1080P Remote Wireless Camera to your phone, please follow these steps:
1. Download the LOOKCAM app: You can download the app by scanning the QR code provided in the user manual or by searching for "LOOKCAM" in the Google Play Store (for Android) or the App Store (for iOS).
2. Connect to the camera's Wi-Fi: Go to your phone's Wi-Fi settings and connect to the Wi-Fi network with the UID number of the camera. This information can be found in the user manual.
3. Open the LOOKCAM app: Once connected to the camera's Wi-Fi, open the LOOKCAM app on your phone.
4. Set up remote viewing: In the app, click on "Cancel point-to-point short-range viewing" and then click "Yes" to pair the camera with your router for remote viewing.
5. Configure Wi-Fi connection: Go to the setup icon in the app, then select "Advanced Configuration" and navigate to "WiFi Connection Configuration". Find your Wi-Fi network, enter the password, and click "OK". The camera will restart automatically.
6. Wait for the camera to restart: It may take about 40 seconds for the camera to restart. Once it is online, you will be able to access the viewable video remotely.
Note: Make sure you enter the correct Wi-Fi password during the setup process. If the camera does not go online, you may need to reset it and re-pair it with your router.
For more detailed instructions and troubleshooting tips, please refer to the LOOKCAM H.264 1080P Remote Wireless Camera User Manual.
Add New Comment