User Manual Q&AAnswer
Feb 15, 2024 - 05:07 AM
To pair the Boltune True Wireless Stereo Earbuds with your device, please follow these steps:
1. Make sure the earbuds are charged. If the battery is low, charge them using the included USB-C charging cable and the charging case.
2. Uncover the lid of the charging case to power on the earbuds. The LED indicators on the earbuds will light up.
3. If you want to use both earbuds (Couple Earbuds Mode), take out both earbuds from the charging case. They will connect with each other automatically, and the LED indicator on the left earbud will flash red and green alternately, indicating that the earbuds are in pairing mode.
4. Turn on the Bluetooth function on your device and search for nearby devices. In the Bluetooth settings, you should see "Boltune BT-BH023" in the list of available devices. Tap on the name to connect.
5. If you want to use only one earbud (Single Earbud Mode), take out the left earbud from the charging case and make sure the right earbud remains in the case. The left earbud will try to pair with the last paired device. If pairing fails, the LED indicator on the left earbud will flash red and green alternately, indicating that it is in pairing mode.
6. Turn on the Bluetooth function on your device and search for nearby devices. In the Bluetooth settings, you should see "Boltune BT-BH023" in the list of available devices. Tap on the name to connect.
Note: If you want to switch back to Couple Earbuds Mode, simply take out the right earbud from the charging case. The earbuds will pair with each other automatically.
If you encounter any issues during the pairing process, you can refer to the "Clear Pairing List" section in the user manual to reset the earbuds and try again.
Add New Comment