User Manual Q&AAnswer
Feb 15, 2024 - 05:04 AM
To connect the ADC-VDB770 Video Doorbell to your Wi-Fi network, you have two options: Access Point (AP) mode or Wi-Fi Protected Setup (WPS) mode.
1. AP mode:
a. After the boot-up process, the camera's LED will blink white. If it doesn't, hold down the doorbell button until the LED begins to blink white.
b. On an Internet-enabled device, connect to the Wi-Fi network named "ADC-VDB770 (XX:XX:XX)" (XX:XX:XX represents the last six characters of the MAC address).
c. Open a web browser on the same device and enter "http://vdb770install" in the URL field.
d. Follow the on-screen instructions to add the ADC-VDB770 to the Wi-Fi network. The camera's LED will be solid green when the connection is complete.
2. WPS mode:
a. After the boot-up process, the camera's LED will blink white. Hold down the doorbell button until the LED begins to blink blue.
b. Activate WPS mode on your Wi-Fi router.
c. The router will begin to connect to the Wi-Fi network, and the camera's LED will be solid green when the connection is complete.
For more detailed instructions and troubleshooting tips, please refer to the ALARM Video Doorbell ADC-VDB770 User Guide provided with the product.
Add New Comment