User Manual Q&AAnswer
Feb 13, 2024 - 02:35 AM
To connect your mobile phone to the Nokia SS2FII Femtocell Multi-Band Soho, you need to install the software on your mobile phone and follow these steps:
1. Go to Menu > Settings > Wireless & Networks > Mobile Networks > Access Point Names and add a new APN.
2. In APN name, enter "femto". In APN type, enter "femto". Leave the username and password fields blank. Click Save.
3. Go to Menu > Settings > Wireless & Networks > Mobile Networks > Network Operators and select "Access Point Names". Select "femto" from the list and click on "Properties".
4. In the "Access Point Names" tab, select "IPv4/IPv6" for the APN Protocol. Leave the Proxy field blank. Click "OK".
5. Go back to Menu > Settings > Wireless & Networks > Mobile Networks > Access Point Names. Select "femto" from the list, click on "Properties", and select the "General" tab.
6. Click on "Roaming Aggregation" and make sure it is set to enabled. Click OK.
7. Repeat step 5 and 6 to ensure that "Roaming Aggregation" is set to enabled.
8. Go back to Menu > Settings > Wireless & Networks > Mobile Networks > Access Point Names. Select "femto" from the list, click on "Properties", and select the "General" tab.
9. Set the "Authentication type" to "PAP", the "Encryption type" to "None", and leave the "Proxy server address/port" field blank. Click OK twice and wait for the connection to establish.
Once you have completed these steps, your mobile phone should be connected to the Nokia SS2FII Femtocell Multi-Band Soho, and you should see improved signal strength and coverage.
Add New Comment