User Manual Q&AAnswer
Feb 12, 2024 - 03:36 AM
To clean your Philips shaver using the SmartClean System, please follow the instructions below:
1. Ensure that the SmartClean System is plugged into a power outlet and turned on.
2. Open the top part of the shaving head by pressing the release button and pulling it off the shaving head.
3. Rinse the top part of the shaving head with water to remove any hair or debris.
4. Shake off any excess water from the shaving head before placing it on the SmartClean System.
5. Place the shaving head on the SmartClean System, ensuring that it fits securely.
6. Press the cleaning button on the SmartClean System to start the cleaning process. The cleaning phase will take approximately 10 minutes.
7. Once the cleaning is complete, remove the shaving head from the SmartClean System and rinse it again with water to remove any remaining cleaning solution.
8. Shake off any excess water and allow the shaving head to air dry completely before reattaching it to your Philips shaver.
Note: It is important to use the cleaning solution provided with the SmartClean System and not try to refill the cartridge with a different cleaning solution, as this can damage your device.
For more detailed instructions and information, please refer to the Philips SmartClean System manual.
Add New Comment