User Manual Q&AAnswer
Feb 12, 2024 - 03:11 AM
Sure! Here are the step-by-step instructions for assembling the Sun Joe SPX3000 Electric Pressure Washer:
1. Position the washer as close as possible to the water supply.
2. Slide the trigger gun holder into position.
3. Slide the handle into position and secure it with 4 large screws.
4. Insert the detergent bottles under the ridge of their designated storage compartment and snap the bottom of the bottles into the V-shaped grooves to secure them in place.
5. Connect the PVC detergent tube to the detergent connection.
6. To assemble the spray wand protector, snap the tab into the slot located at the bottom left side of the unit and secure it in place with one small xxxx .
7. To assemble the hose holder, slide the holder into position and secure it to the unit with the remaining small xxxx .
8. Fit the spray wand into the trigger gun and rotate it until the two parts are completely locked.
9. Connect the high-pressure hose to the trigger gun.
10. Connect the high-pressure hose to the water outlet on the washer.
11. Connect the garden hose adaptor (female coupler) to the water inlet of the pressure washer, then thread your garden hose (male end) into the garden hose adaptor.
12. Turn on the water supply tap completely.
13. Turn the switch to the ON (I) position to start the pressure washer.
Please refer to the Sun Joe SPX3000 Electric Pressure Washer Operator's Manual for more detailed instructions and illustrations.
Add New Comment